1. General specifications
Switching function: Normally closed (NC)
Output type: NAMUR
Rated operating distance: 40 mm
Installation: non-flush
Assured operating distance: 0 ... 32.4 mm
Actual operating distance: 36 ... 44 mm
Reduction factor rAl: 0.45
Reduction factor rCu: 0.45
Reduction factor r304: 0.8
Output type: 2-wire
2. Nominal ratings
Nominal voltage: 8.2 V (Ri approx. 1 kΩ)
Switching frequency: 0 ... 100 Hz
Hysteresis: 1 ... 15 typ. 5 %
Reverse polarity protection: reverse polarity protected
Short-circuit protection: yes
Current consumption
Measuring plate not detected: ≥ 3 mA
Measuring plate detected: ≤ 1 mA
Switching state indicator: LED, yellow
3. Functional safety related parameters
MTTFd: 1415 a
Mission Time (TM): 20 a
Diagnostic Coverage (DC): 0 %
4. Compliance with standards and directives
Standard conformity
NAMUR: EN 60947-5-6:2000
IEC 60947-5-6:1999
Electromagnetic compatibility: NE 21:2007
Standards: EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
5. Ambient conditions
Ambient temperature: -25 ... 100 °C (-13 ... 212 °F)
Storage temperature: -40 ... 100 °C (-40 ... 212 °F)
6. Mechanical specifications
Connection type: screw terminals
Information for connection: A maximum of two conductors with the same core cross section may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross section: up to 2.5 mm2 , stripped insulation length: 7 mm
Minimum core cross-section: without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-section: without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
Connection (system side): screw terminals , M20 x 1.5 cable gland , usable thread length 9.1 mm , screw-in depth max. 9.1 mm
Housing material: PA
Sensing face: PA
Degree of protection: IP66 / IP68 / IP69K
Mass: 225 g
Dimensions
Height: 40 mm
Width: 40 mm
Length: 118 mm
Note: Tightening torque: 1.8 Nm (housing)
7. General information
Use in the hazardous area: see instruction manuals
